How to change a fuel filter in modest engines?

Quick Links:

  • Where Is My Fuel Filter Located?
  • Finding the Right Fuel Filter
  • How to Perform Fuel Filter Replacement

Why Should You Change the Fuel Filter?

At that place are many benefits to changing a fuel filter in your small engine. A fuel filter is designed to properly strain the gas earlier it reaches the carburetor in your lawn mower, snow blower or equipment.

Fuel filter replacement is important because:

  • It prevents strange particles from clogging your engine
  • Muddy fuel filters can cause your engine to run too lean, leading to diminished performance and uneven functioning

Where is My Fuel Filter Located?

The fuel filter volition exist located either inside the fuel tank or fitted into the fuel line betwixt the tank and the fuel pump. Some engines have internal, not-serviceable fuel filters.

If you are unsure of where your fuel filter is located, refer to your Briggs & Stratton® Engine Operator's manual to determine the location.

Finding the Right Fuel Filter for Your Small Engine

The proper fuel filter for your engine depends on the engine's pattern. Check your engine Illustrated Parts Listing or consult your local Briggs & Stratton dealer for the correct replacement filter. One time yous know the right part, you can purchase Briggs & Stratton® fuel filters online.

How to Perform Fuel Filter Replacement

Make sure yous are in a safe expanse with no open flame or burn source. Article of clothing safety eyewear whenever removing or inspecting a filter to protect your eyes from liquid fuel or fuel vapors. Have a dry out material handy to hold the filter and catch any dripping fuel.

If the filter is installed inside the tank, y'all will need to drain the tank before you can remove the filter for inspection or replacement.

  1. Shut the fuel valve, if equipped. Information technology's located at the base of operations of the fuel tank, where the gas line is attached. If your tank is not equipped with a valve, clamp the gas line, using a fuel line clench. Do not pinch fuel line as this could cause damage to it.

  2. If your filter is installed in the fuel line, remove the metallic clips on each side of the filter, using needle nose pliers, and slide the filter out of the fuel line.

  3. Shake the filter over a make clean textile to displace any remaining fuel, then utilize the cloth to wipe away any residue from the outside of the filter.

  4. Keep the filter a condom distance from your face and expect through one end.

  5. You should be able to see light shining through conspicuously from the other side. If debris is bottleneck the mesh screen, pleated paper or the inside of the casing, supercede the one-time filter with a new replacement fuel filter.

  6. When replacing the fuel filter, be sure to reconnect the metal clips on both sides of the filter.

  7. Remove the clamp on the fuel line or reopen the fuel valve when the fuel filter is secure.

  8. Check for leaks. Do not operate the unit if any are found.

Notation: If the fuel line is cracking, replace fuel line to ensure no leaks, fuel line will break down over fourth dimension due to the elements.

Alert: E'er read the engine and equipment manual(s) before starting, operating, or servicing your engine or equipment to avoid personal injury or property damage. See an authorized dealer if you are unsure of any procedure or have additional questions.

Shop Related Maintenance Parts