Your engine needs make clean oil at all times. When y'all have a reusable oil filter, the only way to keep your oil clean is to clean the filter at every oil change. It's an piece of cake procedure that takes only ten-15 minutes.

There are two means to clean your reusable oil filter:

i. Apply A Cleaning Kit

Some reusable oil filter manufacturers also offering cleaning kits. Have our cleaning kit, for case. The ECO-Shower is a cleaning organisation that thoroughly cleans PurePower! lifetime oil filters. Nosotros designed the ECO-Shower to make it every bit easy as possible to make clean your PurePower! oil filter. This video shows how our cleaning kit works:

Here'due south how to employ an ECO-Shower cleaning system:

  1. Remove the lid of the saucepan. Underneath, y'all'll see a grey square bracket that pivots. Flip it over and then lock the cleaning unit of measurement. Set the blueish tube outside of the saucepan.
  2. Find the correct sized cleaning mandrel. Spiral it onto the cleaning unit.
  3. Attach the blueish hose air connector to an air compressor. Set the air pressure to fourscore-150 psi.
  4. Connect a water hose to the side of the cleaning unit. Ensure a tight fit so information technology doesn't leak.
  5. Remove the oil filter from the vehicle and then disassemble information technology. Unscrew the tiptop of the filter, and then accept it off of the long hollow canister.
  6. Spray Eco Sudz into the interior of the filter element. Adjacent, slide the filter element onto the mandrel. Secure with the locking ring provided.
  7. Spray Eco Sudz onto the outside of the filter element.
  8. Permit the filter element sit down for at to the lowest degree 5 minutes. This will allow the lather to practice its magic.
  9. Turn on the hose and the air valve.
  10. Slowly rotate the filter element until it'southward clean.
  11. Turn off the hose and so exit the air supply on. Rotate the filter until it's dry.
  12. Remove the filter element so dry it off with compressed air.
  13. Dispose of the dirty water past pouring it downwardly the drain. The detergent we use breaks down the oil enough to brand this rubber and legal in most communities. (Always check your local regulations.)

ii. Clean The Oil Filter Manually

Drying filter
Epitome Credit: Greg Friend

You can opt to clean your oil filter manually. There are many different erstwhile school methods. First, take the filter element out and so soak it into one of the post-obit for a few minutes:

  • Gasoline
  • Carb/choke cleaner
  • Soap and water

Give it a shake every once in a while. Drain the fluid. Adjacent, dry the filter out with an air compressor.

The ECO-Shower Produces Improve Results

eco shower

If you want your PurePower! oil filter every bit clean as possible, use an ECO-Shower. Our cleaning system is easier and ameliorate than the manual method. This is because:

  • It's less messy. Everything is contained within the bucket.
  • Y'all'll come across more thorough results.
  • Y'all won't exist using whatsoever harsh chemicals that are harmful to the environment.

Learn more about the ECO-shower today!